Colorado mountain hologram?

This is exactly what I needed to know

Just got my hands on a Colorado with the mountain hologram, and I gotta say it's pretty solid overall. Under normal indoor lighting you really can't tell it's a fake — the hologram catches the light the same way the real one does, with that subtle shimmer that shifts as you tilt the card. The mountain range in the hologram has that layered look — like, peaks in the foreground and background kind of blending together in this purple-to-green gradient. What I really like is that the hologram doesn't have that cheap, sticker-like edge separation — it's fully embedded into the laminate so it feels continuous with the rest of the card. The back has a smaller holographic state outline too, and that one also shifts nicely between colors, though maybe a bit less bright than the front.

I checked the microprint under a 60x loupe. Around the state outline on the front, the tiny "Colorado" text along the border was readable — though the letters looked a hair thicker than I remember from a real one I saw a while back. Still, you'd need a loupe and a reference to notice it. The microprint on the back around the ID number area was crisp — no smudging or blurry sections. That's a good sign 'cause a lot of batches mess that up.

UV light response: I hit it with a 365nm blacklight. The state seal in the center glowed that typical yellow-green, and the mountain silhouette showed up with decent brightness — not as punchy as a real CO ID I've compared it to, but close enough that I doubt a bouncer's gonna pull out a UV light to compare. The background UV pattern with the state name repeated across the card was there but a little dimmer than expected. Under a direct UV light you can see it, but in a dim club it might be harder to spot. That said, the color was right — no weird blue or pink tints that scream fake.

The OVI (color-shifting ink) on the "Colorado" text and the state seal number looks honestly pretty convincing. It shifts from a bright metallic green under direct light to a dull copper tone when you tilt it away. The transition is smooth, not abrupt — which is a tell on some fakes. The shift is subtle, exactly how real CO behaves. Under a desk lamp the green pops nicely, and at a 45-degree angle it goes to that coppery brown without any rainbow splotching.

Card material feels right. It's got that slightly rubbery Teslin texture with a plasticky overlay — not too glossy, not too matte. Edges are smooth, no delamination or peeling. Thickness seems spot on — I don't have calipers on me, but it sits flush in my wallet and doesn't feel thicker or thinner than a real state ID I handled last week. The embossed text on the back has decent depth, though maybe a tiny bit shallow — still, it catches your fingernail when you run it over.

Overall I'd give this one a solid 7.5/10. The hologram is the standout feature — under normal lighting you'd be hard pressed to call it out as a fake. The UV and microprint have slight flaws but nothing that would fail a quick glance test. The OVI is the next best thing after the

Really appreciate this post

The mountain hologram is the best Ive seen. Very accurate